Power System Analysis and Design, (SI Edition - Not available for student purchase in the U.S.) 7th edition

Access is contingent on use of this textbook in the instructor's classroom.

• Chapter 1: Introduction
  • 1.1: History of Electric Power Systems
  • 1.2: Present and Future Trends
  • 1.3: Electric Utility Industry Structure
  • 1.4: Computers in Power System Engineering
  • 1: Chapter Quiz
  
  
• Chapter 2: Fundamentals
  • 2.1: Phasors
  • 2.2: Instantaneous Power in Single-Phase AC Circuits
  • 2.3: Complex Power
  • 2.4: Network Equations
  • 2.5: Balanced Three-Phase Circuits
  • 2.6: Power in Balanced Three-Phase Circuits
  • 2.7: Advantages of Balanced Three-Phase versus Single-Phase Systems
  • 2.8: Energy Conversion
  • 2: Chapter Quiz
  
  
• Chapter 3: Power Transformers
  • 3.1: The Ideal Transformer
  • 3.2: Equivalent Circuits for Practical Transformers
  • 3.3: The Per-Unit System
  • 3.4: Three-Phase Transformer Connections and Phase Shift
  • 3.5: Per-Unit Equivalent Circuits of Balanced Three-Phase Two-Winding Transformers
  • 3.6: Three-Winding Transformers
  • 3.7: Autotransformers
  • 3.8: Transformers with Off-Nominal Turns Ratios
  • 3: Chapter Quiz
  
  
• Chapter 4: Transmission Line Parameters
  • 4.1: Transmission Line Design Considerations
  • 4.2: Resistance
  • 4.3: Conductance
  • 4.4: Inductance: Solid Cylindrical Conductor
  • 4.5: Inductance: Single-Phase Two-Wire Line and Three-Phase Three-Wire Line with Equal Phase Spacing
  • 4.6: Inductance: Composite Conductors, Unequal Phase Spacing, Bundled Conductors
  • 4.7: Series Impedances: Three-Phase Line with Neutral Conductors and Earth Return
  • 4.8: Electric Field and Voltage: Solid Cylindrical Conductor
  • 4.9: Capacitance: Single-Phase, Two-Wire Line and Three-Phase, Three-Wire Line with Equal Phase Spacing
  • 4.10: Capacitance: Stranded Conductors, Unequal Phase Spacing, Bundled Conductors
  • 4.11: Shunt Admittances: Lines with Neutral Conductors and Earth Return
  • 4.12: Electric Field Strength at Conductor Surfaces and at Ground Level
  • 4.13: Parallel Circuit Three-Phase Lines
  • 4: Chapter Quiz
  
  
• Chapter 5: Transmission Lines: Steady-State Operation
  • 5.1: Medium and Short Line Approximations
  • 5.2: Transmission-Line Differential Equations
  • 5.3: Equivalent π Circuit
  • 5.4: Lossless Lines
  • 5.5: Maximum Power Flow
  • 5.6: Line Loadibility
  • 5.7: Reactive Compensation Techniques
  • 5: Chapter Quiz
  
  
• Chapter 6: Power Flows
  • 6.1: Direct Solutions to Linear Algebraic Equations: Gauss Elimination
  • 6.2: Iterative Solutions to Linear Algebraic Equations: Jacobi and Gauss-Seidel
  • 6.3: Iterative Solutions to Nonlinear Algebraic Equations: Newton-Raphson
  • 6.4: The Power Flow Problem
  • 6.5: Power Flow Solution by Gauss-Seidel
  • 6.6: Power Flow Solution by Newton-Raphson
  • 6.7: Control of Power Flow
  • 6.8: Sparsity Techniques
  • 6.9: Fast Decoupled Power Flow
  • 6.10: The "DC" Power Flow
  • 6.11: Power Flow Modeling of Wind and Solar Generation
  • 6.12: Realistic and Large-Scale Power Flow Models
  • 6: Chapter Quiz
  
  
• Chapter 7: Power System Economics and Optimization
  • 7.1: Generator and Load Economics
  • 7.2: Economic Dispatch
  • 7.3: Optimal Power Flow
  • 7.4: Unit Commitment and Longer Term Optimization
  • 7.5: Markets
  • 7: Chapter Quiz
  
  
• Chapter 8: Symmetrical Faults
  • 8.1: Series R—L Circuit Transients
  • 8.2: Three-Phase Short Circuit—Unloaded Synchronous Machine
  • 8.3: Power System Three-Phase Short Circuits
  • 8.4: Bus Impedance Matrix
  • 8.5: Circuit Breaker and Fuse Selection
  • 8: Chapter Quiz
  
  
• Chapter 9: Symmetrical Components
  • 9.1: Definition of Symmetrical Components
  • 9.2: Sequence Networks of Impedance Loads
  • 9.3: Sequence Networks of Series Impedances
  • 9.4: Sequence Networks of Three-Phase Lines
  • 9.5: Sequence Networks of Rotating Machines
  • 9.6: Per-Unit Sequence Models of Three-Phase, Two-Winding Transformers
  • 9.7: Per-Unit Sequence Models of Three-Phase, Three-Winding Transformers
  • 9.8: Power in Sequence Networks
  • 9: Chapter Quiz
  
  
• Chapter 10: Unsymmetrical Faults
  • 10.1: System Representation
  • 10.2: Single Line-to-Ground Fault
  • 10.3: Line-to-Line Fault
  • 10.4: Double Line-to-Ground Fault
  • 10.5: Sequence Bus Impedance Matrices
  • 10: Chapter Quiz
  
  
• Chapter 11: System Protection
  • 11.1: System Protection Components
  • 11.2: Instrument Transformers
  • 11.3: Overcurrent Relays
  • 11.4: Radial System Protection
  • 11.5: Reclosers, Fuses, and Sectionalizers
  • 11.6: Directional Relays
  • 11.7: Protection of a Two-Source System with Directional Relays
  • 11.8: Zones of Protection
  • 11.9: Line Protection with Impedance (Distance) Relays
  • 11.10: Differential Relays
  • 11.11: Bus Protection with Differential Relays
  • 11.12: Transformer Protection with Differential Relays
  • 11.13: Pilot Relaying
  • 11.14: Numeric Relaying
  • 11: Chapter Quiz
  
  
• Chapter 12: Power System Stability
  • 12.1: The Swing Equation
  • 12.2: Simplified Synchronous Machine Model and System Equivalents
  • 12.3: The Equal-Area Criterion
  • 12.4: Numerical Integration of the Swing Equation
  • 12.5: Multimachine Stability
  • 12.6: A Two-Axis Synchronous Machine Model
  • 12.7: Wind Turbine and Solar PV Machine Models
  • 12.8: Load Models
  • 12.9: Design Methods for Improving Power System Stability
  • 12: Chapter Quiz
  
  
• Chapter 13: Power System Controls
  • 13.1: Generator-Voltage Control
  • 13.2: Turbine-Governor Control
  • 13.3: Load-Frequency Control
  • 13.4: Power System Stabilizer Control
  • 13: Chapter Quiz
  
  
• Chapter 14: Transmission Lines: Transient Operation
  • 14.1: Traveling Waves on Single-Phase Lossless Lines
  • 14.2: Boundary Conditions for Single-Phase Lossless Lines
  • 14.3: Bewley Lattice Diagram
  • 14.4: Discrete-Time Models of Single-Phase Lossless Lines and Lumped RLC Elements
  • 14.5: Lossy Lines
  • 14.6: Multiconductor Lines
  • 14.7: Power System Overvoltages
  • 14.8: Insulation Coordination
  • 14: Chapter Quiz
  
  
• Chapter 15: Power Distribution
  • 15.1: Introduction to Distribution
  • 15.2: Primary Distribution
  • 15.3: Secondary Distribution
  • 15.4: Transformers in Distribution Systems
  • 15.5: Shunt Capacitors in Distribution Systems
  • 15.6: Distribution Software
  • 15.7: Distribution Reliability
  • 15.8: Distribution Automation
  • 15.9: Smart Grids
  • 15: Chapter Quiz